LIGHT BORE KIT 164CC
CLICK 125i eSP & VARIO TECHNO 125 PGM-FI
The 164cc, 60mm eSP cylinder kit is specially made for the new HONDA CLICK125i eSP (enhanced Smart Power) & HONDA VARIO TECHNO 125 PGM-FI engine to use in combination with the standard 125cc cylinderhead (27/22mm valves).
The piston that comes with the kit is a high-end piston made of a special aluminum alloy for racing applications and only relased after hours and hours of intensive testing.
The 164cc eSP Light Bore Kit can be installed on all new Honda 125cc eSP engines like the new PCX125 eSP, 2013 Honda SH125i ABS (eSP), 2012 Honda Click125i eSP, etc...
**The Yuminashi Progressive 2-Valve Spring Racing Conversion set 14752-KWN-000 is required to avoid floating valves. If you don't pay attention to this, then the valves will start to float even before the electronic limiter kicks in.
Compression ratio: 12.8:1
Compatible with regular gasoline.
**Recommended to install the High Performance YUASA YTZ 7S battery in combination with the higher compression from this set compared with standard.
The CLICK 125i / VARIO TECHNO 125 PGM-FI 164CC LIGHT BORE KIT includes:
- 1 x 60mm Aluminum cylinder
- 1 x 60mm Top-End Light Bore Piston
- 1 x 60mm Piston ring set
- 1 x Piston pin (13mm)
- 2 x Piston clip
- 1 x 60mm Head gasket
- 1 x Cylinder base gasket
- 1 x Tensioner lifter gasket
PRODUCT CODE: 12103-KZY-600A
PRICE: 8,734THB (222.00€) Exclusive V.A.T.